Skip to main content

Testing Your Odyssey Setup

Once you have configured Odyssey, you can test your Odyssey setup using the Odyssey Automated Test Interface. In the Test Interface, you can enter your Odyssey address into the tool and send yourself a test document.

  1. Go to the Odyssey Automated Test Interface at https://odyssey-testing.atlas-sys.com.
  2. Select Senderto test Receiving functionality or Receiverto test sending functionality.

odyssey-testing-connectivity.png

Testing Odyssey Receiving​

  1. Select the Senderoption.
  2. Enter your Odyssey IP address, port number, and NVTGC in the following format: ADDRESS:PORT/NVTGC (example: 1.2.3.4:7968/ILL).
  3. Click Send.
  4. You will see a message indicating if the sending was successful or not. If sending fails, you will be given a specific error with suggestions for troubleshooting the problem.

odyssey-testing-sender.png

Testing Odyssey Sending​

  1. Send a document from your Odyssey implementation to odyssey.atlas-sys.com:7968/ILL.
  2. Return to the Odyssey Test web site and click Receiver.
  3. Enter your Odyssey sender address to view the received documents.

odyssey-testing-receiver.png